Home > C3 1968-1982 > Brakes - C3 > C3 Brake Calipers
C3 Brake Calipers
Sort By:
Page of 1
Caliper Mounting Bolt Kit (1965-82) Caliper Mounting Bolt Kit (1965-82)

1965-82 Brake caliper mounting bolt kit includes 4 front bolts and lockwashers and 4 rear bolts and lockwashers to mount the calipers to the brackets.

Our Price: $6.95
Brake Caliper Piston Retaining Tool (1965-82) Brake Caliper Piston Retaining Tool (1965-82)

This 4 piece set makes it easy to swap pads without damaging piston boots or seals.  Allows you to compress and hold all 4 caliper pistons at one time.

Our Price: $11.95
Stainless Steel Sleeved Lip Seal Caliper LF (1965-1982) Stainless Steel Sleeved Lip Seal Caliper LF (1965-1982)

1965-82 Corvette Left Front Lip Seal Caliper.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new OE aluminum pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Lip Seal Calipers are OEM type seals just like the car came from factory with. Price includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $129.95
Stainless Steel Sleeved Lip Seal Caliper LR (1965-1982) Stainless Steel Sleeved Lip Seal Caliper LR (1965-1982)

1965-82 Corvette Left Rear Lip Seal Caliper.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new OE aluminum pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Lip Seal Calipers are OEM type seals just like the car came from factory with. Price includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $129.95
Stainless Steel Sleeved Lip Seal Caliper RF (1965-1982) Stainless Steel Sleeved Lip Seal Caliper RF (1965-1982)

1965-82 Corvette Right Front Lip Seal Caliper.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new OE aluminum pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Lip Seal Calipers are OEM type seals just like the car came from factory with.  Price includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $129.95
Stainless Steel Sleeved Lip Seal Caliper RR (1965-1982) Stainless Steel Sleeved Lip Seal Caliper RR (1965-1982)

1965-82 Corvette Right Rear Lip Seal Caliper.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new OE aluminum pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Lip Seal Calipers are OEM type seals just like the car came from factory with. Price includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $129.95
Stainless Steel Sleeved O-Ring Seal Caliper LF (1965-1982) Stainless Steel Sleeved O-Ring Seal Caliper LF (1965-1982)

1965-82 Corvette Left Front O-Ring Caliper. O-Ring calipers come with a specially designed 45 degree parting line seal with matching piston which ensures four good sealing surfaces.  These calipers work well for preventing leaks on cars that are not driven frequently.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment. Price Includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $149.95
Stainless Steel Sleeved O-Ring Seal Caliper LR (1965-1982) Stainless Steel Sleeved O-Ring Seal Caliper LR (1965-1982)

1965-82 Corvette Left Rear O-Ring Caliper.  O-Ring calipers come with a specially designed 45 degree parting line seal with matching piston which ensures four good sealing surfaces.  These calipers work well for preventing leaks on cars that are not driven frequently.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Price Includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $149.95
Stainless Steel Sleeved O-Ring Seal Caliper RF (1965-82) Stainless Steel Sleeved O-Ring Seal Caliper RF (1965-82)

1965-82 Corvette Right Front O-Ring Caliper.  O-Ring calipers come with a specially designed 45 degree parting line seal with matching piston which ensures four good sealing surfaces.  These calipers work well for preventing leaks on cars that are not driven frequently.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Price Includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $149.95
Stainless Steel Sleeved O-Ring Seal Caliper RR (1965-1982) Stainless Steel Sleeved O-Ring Seal Caliper RR (1965-1982)

1965-82 Corvette Right Rear O-Ring Caliper.  O-Ring calipers come with a specially designed 45 degree parting line seal with matching piston which ensures four good sealing surfaces.  These calipers work well for preventing leaks on cars that are not driven frequently.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment.  Price Includes $50 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $149.95
Wilwood Performance D8-4 Caliper Front Axle Set (1965-1982) Wilwood Performance D8-4 Caliper Front Axle Set (1965-1982)

The D8-4 caliper is a direct bolt-on replacement for the factory original calipers on all 1965-82 Corvette's. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put and end to the rust, bore pitting, and seal failures that plague the OE caliper design. D8-4 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D8-4 calipers mount in the stock location over stock rotors, and use the original style OE D8 brake pads. Calipers can be used with any wheel that clears the OE calipers. The factory piston sizes were duplicated to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain DOT compliant stainless steel braided brake lines with BP-10 high friction pads.

Our Price: $499.95
Wilwood Performance D8-4 Caliper Rear Axle Set (1965-1982) Wilwood Performance D8-4 Caliper Rear Axle Set (1965-1982)

The D8-4 caliper is a direct bolt-on replacement for the factory original calipers on all 1965-82 Corvette's. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put and end to the rust, bore pitting, and seal failures that plague the OE caliper design. D8-4 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D8-4 calipers mount in the stock location over stock rotors, and use the original style OE D8 brake pads. Calipers can be used with any wheel that clears the OE calipers. The factory piston sizes were duplicated to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain DOT compliant stainless steel braided brake lines with BP-10 high friction pads.

Our Price: $499.95
1965-1982 Set of 4 Stainles Steel Sleeved Lip Seal Calipers (1965-1982) 1965-1982 Set of 4 Stainles Steel Sleeved Lip Seal Calipers (1965-1982)

1965-82 Corvette Lip Seal Caliper Car Set (4).  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new OE aluminum pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment. Lip Seal calipers are OEM type seal just like the car came from factory with. Matching correct castings are available for each year.  Matching castings will automatically come painted in GM Semi-Gloss Black.  Price includes $200 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $518.95
1965-1982 Brake Super Kit-Lip Seal (No Master Cylinder) (1965-1982) 1965-1982 Brake Super Kit-Lip Seal (No Master Cylinder) (1965-1982)

1965-82 Corvette Superkit-No Master Cylinder. Muskegon Brake's famous "Bolt-On Brake Job" contains everything you will need to do a complete brake job on your corvette: 4 rebuilt stainless steel sleeved lip seal calipers, 8 premium organic brake pads, 4 rubber brake hoses, 4 brake hose clips, 2 copper washers, 8 caliper mounting bolts with lock washers, 1 pair stainless steel rear trailing arm lines, and 2 quarts DOT3 Synthetic brake fluid. Price Includes $200 core deposit ($50 per caliper).

Our Price: $579.00
Set of 4 Stainles Steel Sleeved O-Ring Seal Calipers (1965-1982) Set of 4 Stainles Steel Sleeved O-Ring Seal Calipers (1965-1982)

1965-82 Corvette O-Ring Caliper Car Set (4). O-Ring calipers come with a specially designed 45 degree parting line seal with matching piston which ensures four good sealing surfaces.  These calipers work well for preventing leaks on cars that are not driven frequently.  Each caliper is bored and sleeved back to original equipment specs with stainless steel sleeves, polished to a 4 micron finish. Each caliper is then carefully cleaned and shot-blasted with all threaded holes cleaned and tapped. Each caliper is assembled with new pistons, new bleeders, pad pins, new rubber seals and dust boots. Every caliper is tested with high pressure nitrogen on special flaw detection equipment. Price includes $200 Core Deposit.  Calipers come with a lifetime warranty on the stainless steel sleeves. Rubber components are under warranty for one year.

Our Price: $579.95
Wilwood D8-6 Piston Front Caliper Kit (1965-82) Wilwood D8-6 Piston Front Caliper Kit (1965-82)

Wilwood's D8-6 calipers are a direct bolt-on replacement for the OE calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, grey Anodize finish (or Black/Red Powdercoat), stainless steel pistons, and high-temperature seals put an end to the rust, bore pitting and seal failures that plague the OE caliper design. D8-6 calipers provide low-maintenance performance, a huge weight savings, high temperature reliability, and the added benefit of six piston pad clamping power. D8-6 calipers mount in the stock location over stock rotors, use the original style D8 brake pads, and fit snugly inside most '67 or newer production wheels. Some wheels, including the 1965-66 OE "JK" code steel wheels and a few aftermarket replica alloy wheels, will require a 3/16" or wider wheel spacer for clearance. D8-6 calipers use the same overall piston volume as the original calipers, but with the added benefit of differential bores. Differential bores counteract pad taper in high temperature racing and the 6 piston design offer greater pad support. With its unyielding strength and superior piston design, the D8-6 and D8-4 calipers generate positive pedal response and high clamping efficiency with a substantial weight savings. Kits contain DOT compliant stainless braided brake lines Promatrix compound pads.

Our Price: $609.95
Brake Super Kit (1977-1982) Brake Super Kit (1977-1982)

1977-82 Corvette Superkit.  Muskegon Brake's famous "Bolt-On Brake Job" contains everything you will need to do a complete brake job on your corvette: 4 rebuilt stainless steel sleeved lip seal calipers, 8 premium organic brake pads, 4 rubber brake hoses, 4 brake hose clips, 2 copper washers, 8 caliper mount bolts with lock washers, 1 pair stainless steel rear trailing arm lines, 2 quarts DOT3 Synthetic brake fluid, and a new brake master cylinder.  Price Includes $200 core deposit.

Our Price: $609.95
Brake Super Kit (Manual Brakes) (1967-1976) Brake Super Kit (Manual Brakes) (1967-1976)

1967-76 Corvette Non-Power Superkit.  Muskegon Brake's famous "Bolt-On Brake Job" contains everything you will need to do a complete brake job on your corvette: 4 rebuilt stainless steel sleeved lip seal calipers, 8 premium organic brake pads, 4 rubber brake hoses, 4 brake hose clips, 2 copper washers, 8 caliper mount bolts with lock washers, 1 pair stainless steel rear trailing arm lines, 2 quarts DOT3 Synthetic brake fluid, and a new brake master cylinder.  Price Includes $200 core deposit.  This Kit is also the correct kit for a 1967 with Power Brakes.

Our Price: $609.95
Brake Super Kit (Power Brakes) (1968-1976) Brake Super Kit (Power Brakes) (1968-1976)

1968-76 Corvette Power Brake Superkit.  Muskegon Brake's famous "Bolt-On Brake Job" contains everything you will need to do a complete brake job on your corvette: 4 rebuilt stainless steel sleeved lip seal calipers, 8 premium organic brake pads, 4 rubber brake hoses, 4 brake hose clips, 2 copper washers, 8 caliper mount bolts with lock washers, 1 pair stainless steel rear trailing arm lines, 2 quarts DOT3 Synthetic brake fluid, and a new brake master cylinder.  Price Includes $200 core deposit.

Our Price: $609.95